{"title":"2011-2016 LML CABLES\/ SWITCHES","description":"","products":[{"product_id":"lml-11-16-sotf","title":"2011-2016 LML 6.6L SOTF DSP5","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e5-position selector switch designed to meet various driving requirements.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAluminum control knob with raised texture has a good grip and durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe segmented braided tube heat-resistant wire can withstand high temperatures and wear in the engine compartment.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eEnsure that power supply remains normal even in extremely hot engine compartment conditions.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstall the yellow wire from the switch into pin #11 and the black wire into #35.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eFit: \u003c\/span\u003e2011-2016 6.6L Chevy Duramax LML 2500HD 3500HD models.\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eLocate pins #11 and #35 of the ECM.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-cyRdfs qmQNK rid-1\" data-pf-type=\"Heading2\"\u003eStep 1:\u003c\/h3\u003e\n\u003cp data-pf-type=\"Paragraph3\" class=\"sc-kUdmUV iejJTZ rid-52\"\u003e1.Open the hood, first disconnect the negative terminals of both power sources, locate the hood release rubber seal on the driver's side firewall, and then pull it out.\u003cbr\u003e2.Locate the Engine Control Module (ECM), which is typically located in the front of the engine compartment on the driver's side, near the battery. First, remove the bracket from the ECM, then disconnect the first ECM closest to the cab from its connector.\u003c\/p\u003e\n\u003ch3 class=\"sc-cyRdfs qmQNK pf-36_\" data-pf-type=\"Heading2\"\u003eStep 2:\u003c\/h3\u003e\n\u003cp data-pf-type=\"Paragraph3\" class=\"sc-kUdmUV iejJTZ pf-38_\"\u003e1.Carefully thread the wire through the hole where the rubber gasket was removed earlier into the engine compartment from the cab. Ensure the wire on the engine compartment side is long enough to connect to the Engine Control Module (ECM) harness.\u003cbr\u003e2.Use the conduit provided with the switch to protect the switch wire from high temperatures. Carefully reinstall the hood latch rubber gasket around the harness.\u003c\/p\u003e\n\u003ch3 class=\"sc-cyRdfs qmQNK pf-42_\" data-pf-type=\"Heading2\"\u003eStep 3:\u003c\/h3\u003e\n\u003cp data-pf-type=\"Paragraph3\" class=\"sc-kUdmUV iejJTZ pf-44_\"\u003eRemove the cover from the ECM harness that was removed in step 2.\u003c\/p\u003e\n\u003ch3 class=\"sc-cyRdfs qmQNK pf-48_\" data-pf-type=\"Heading2\"\u003eStep 4:\u003c\/h3\u003e\n\u003cp data-pf-type=\"Paragraph3\" class=\"sc-kUdmUV iejJTZ pf-50_\"\u003eRemove the panel with many pinholes on the side where the connector is inserted.\u003c\/p\u003e\n\u003ch3 class=\"sc-cyRdfs qmQNK pf-54_\" data-pf-type=\"Heading2\"\u003eStep 5:\u003c\/h3\u003e\n\u003cp data-pf-type=\"Paragraph3\" class=\"sc-kUdmUV iejJTZ pf-56_\"\u003eLocate pins #11 and #35 of the ECM.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-cyRdfs qmQNK pf-60_\" data-pf-type=\"Heading2\"\u003eStep 6:\u003c\/h3\u003e\n\u003cp data-pf-type=\"Paragraph3\" class=\"sc-kUdmUV iejJTZ pf-62_\"\u003eThis step only applies to 2011 model trucks. Use a pry bar or paperclip to insert between the pin and the device gap of pin #11 to pop out the yellow pin of pin #11.\u003c\/p\u003e\n\u003ch3 class=\"sc-cyRdfs qmQNK pf-66_\" data-pf-type=\"Heading2\"\u003eStep 7:\u003c\/h3\u003e\n\u003cp data-pf-type=\"Paragraph3\" class=\"sc-kUdmUV iejJTZ pf-68_\"\u003e1.Insert the yellow wire into pin #11 and the black wire into pin #35, ensuring they are fully inserted into the bottom of the ECM connector.\u003cbr\u003e2.Install the panel with multiple pinholes on the connector insertion side and the ECM harness cover.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-cyRdfs qmQNK pf-72_\" data-pf-type=\"Heading2\"\u003eStep 8:\u003c\/h3\u003e\n\u003cp data-pf-type=\"Paragraph3\" class=\"sc-kUdmUV iejJTZ pf-74_\"\u003e1.Finally, reconnect the ECM connectors to the ECM. The engine compartment installation is now complete.\u003cbr\u003e2.Drill a small hole of appropriate size on a suitable panel near the dashboard in the driver's cab and install the switch.\u003cbr\u003e3.Secure the switch harness to the other harnesses below the dashboard using electrical tape or cable ties.\u003c\/p\u003e","brand":"JAT Supply Co","offers":[{"title":"Default Title","offer_id":44101047910591,"sku":"","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0506\/8433\/0175\/files\/CC23C8C0-B389-4FC1-979B-852203421C5E.png?v=1741144223"}],"url":"https:\/\/jatsupplyco.com\/collections\/2011-2016-lml-cables-switches.oembed","provider":"JAT Supply Co","version":"1.0","type":"link"}